[ROM][WIP] CM11 Badadroid v4 [Samsung Wave 1 And 2]

CM11
CM11 Badadroid v4 For Samsung Wave 1 And 2

Hi all Volk204 and Rebellos has released the latest version of the CM11 Badadroid v4 which is based on the latest version of the Android that is v4.4.2. This is the ALPHA version do just do ahead, and complaint about it since the developers already mentioned that its an alpha version so they won’t entertain complaints and they might get irritated by useless questions.

So just download and install this new version of CM11 Badadroid v4 and enjoy…:)
FEATURES of CM11 Badadroid v4

  • Android 4.4.2
  • CM sources of 13.01.2014
  • Updated to linux kernel version 3.0.101
  • 270 MB RAM

KNOWN BUGS (what doesn’t work):

  •  Network registration don’t work with some SIM cards
  •  GPS - http://forum.xda-developers.com/show…postcount=1371
  •  Conference Calls
  •  Some problems with audio codec settings, but generally it should
  •  Impossible to shut down phone in android, only restart
  •  Don’t leave phone charging without supervising – if it gets enormously hot, disconnect it – this can literally blow up battery as there is no overheating protection yet. Do not leave it connected on 100% – it’ll discharge by 1% all the time, and then recharge, what’s very unhealthy for battery.

Maybe something else, what i forgot

FIRST INSTALLATION
Bada 2.0 is required

  1. Enter Bada Settings->General->Memory and make sure you have at least:
    370MB of free “System” memory
    160MB of free “User” memory
    400MB of free “Applications” memory
  2. Download BOOTFILES, armlinux_boot for your device:
    for 8500:
    http://yadi.sk/d/W4RjnjQRC6TfP
    http://yadi.sk/d/Yz7_dfpkC6TkC
    for 8530
    http://yadi.sk/d/kxJ0CZ20C7AKF
    http://yadi.sk/d/zqzWZ9LmC7AJA
    (please pay attention if it’s S8500 or S8530 BOOTFILES and FOTA you’re choosing!):
  3. Download ROM from CHANGELOG section
  4. Start Bada.
  5. Extract zImage from zip and copy it to the Bada’s User partition (the one about 390MB big).
  6. Copy whole .zip to the Bada’s User partition or SD Card.
  7. Flash BOOTFILES and FOTA using Multiloader.
  8. Reboot the phone holding Power and Call key.
  9. FOTA set of red messages should appear, after about 15seconds Badadroid logo shows up.
  10. Be patient, first bootup will keep unresponsve on Badadroid logo for up to 5 minutes.
  11. CWM Recovery starts, pick:
    - “install zip”
    - “choose zip from from storage/sdcard1″
    (Bada’s User partition) or “choose zip from storage/sdcard0″(SD Card)
    - cm-11-wave-<release id>.zip
    - Yes – install
  12. Reboot holding the Power key

You can remove installation .zip from the User partition from Android level by connecting through USB in MTP mode.
Do not remove zImage file.
Normal bootup is available using Power+Call keys
CWM Recovery mode is available using Power+Volume Up keys
CWM Flashing does overwrite zImage. So every next update you can just flash .zip through CWM.

For activation Performance and Developer Options categories in Settings you need Settings->About Phone and tap 7 times on Build number

GAPPS
GAPPS make our ROM slowler, because also slim GAPPS take about 15-20 MB RAM permanently
SLIM GAPPS: http://d-h.st/users/ZordanKV/?fld_id=28623#files

HOW TO UNINSTALL
Follow the steps there: http://forum.xda-developers.com/show…&postcount=393

THANKS TO

Special thanks to Rebellos for his CM10 ROM, for his good sources and many time, what he spent for my learning
Another Badadroid devs: Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen and many others.
CyanogenMod team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL
and many other who help us.

CHANGELOG:

CM11 Badadroid v4 initial release: http://www.multiupload.nl/YHC2P74SJZ
- CM Sources 13.01.2014
- Big patch set from mackay kernel:
http://forum.xda-developers.com/show….php?t=2532813 :updated CPU governors, I/O    schedulers, and many other performance patches
- 80Mb zRAM
Common bug for all low RAM devices with KitKat ROM:
- Incoming calls sometimes take a long time to display.

Pawitp created workaround for it:
flashable zip: http://forum.xda-developers.com/show…postcount=1732

Now ZRAM settings moved to kernel and i want to ask you to test kernels with different values of zRAM
http://www.multiupload.nl/4EY0TRBQC5 - 100Mb zRAM
http://www.multiupload.nl/L0SD7LPGM7 - 120Mb zRAM

BigMem kernels 314 MB RAM, so no photo camera, video playback and video recording and web video
http://www.multiupload.nl/U7YVQZ3AKT - 100Mb zRAM
http://www.multiupload.nl/3XSSWB2268 - 120Mb zRAM

All test kernels should be renamed to “zImage” before testing
For testing kernel just replace it on Bada User partition

MORE LINKS
Overall project thread - http://forum.xda-developers.com/show….php?t=1459391

Source
Bookmark and Share
  • Sushil Changole

    make it fast sir but still gud job i like wave 2 now

  • Anas Qureshi

    is it anyway better than Zendrokat?

    • Abdul

      No, Zendrokat is better than this ROM. This ROM has issues with Wifi, no playstore & compartively a bit slower than Zendrokat

  • damiaan

    wifi nt working

    • Santino Shirodkar

      it will only work if u keep wifi on and restart the phone

  • damiaan

    plz help sort out wifii

  • itsnot.me

    why only 270 mb ram ? :/

  • Guest

    can download and install all the apps using 1mobile market

  • Santino Shirodkar

    can download and install all the apps using 1mobile market..

  • trivedi karan

  • Erih Lucena

    trabaja bien gsm, los sensores y eso

  • trivedi karan
  • daniel

    is the incoming call workaround a patch? can i use it with zendrokat like the wi-fi/bt patch? does it install in the same way?